Wilson #801245 Dual Band Wireless Amplifier

For Fixed and Mobile Signal Enhancement

This 50 dB dual band wireless amplifier enhances the cell signals for both the Cellular (824 - 894 MHz) and the PCS (1850 - 1990 MHz) bands. This unit works with AT&T, Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Sprint, T-Mobile and all other Cellular and PCS carriers. This repeater is used in fixed locations such as homes, offices, warehouses, and smaller areas as well as RVs, Yachts, and condos.

Will not work for NEXTEL or any other iDEN network carrier.

Includes...

#801245 50 dB Dual Band 850/1900 MHz Wireless Amplifier
115v Wall Power Adapter
Installation Instructions

Price...$499.00 BUY THIS ITEM

Features

• For 800 MHz Cellular and 1900 MHz PCS Bands.
• Works on all generations of CDMA, TDMA AND GSM.
• Automatic gain control to prevent oscillation.
• Automatic shutdown on overload.
• Maximum +30 dBm output power.
• Receiver sensitivity -110 dBm CDMA 1% FER.

• Designed specificantlly for small office and home office enviroments, apartments, high rises, condominiums, and dormitories.
• Greatly reduces disconnects and dropped calls.
• Significantly improves voice and data signal quality.
• Has up to 10 times more power than your cell phone or laptop data card
• Significantly improves voice and data signal quality
• Improves data communication rates needed for 3G technologies.
• Receives and transmits better than a cell phone or cellular data card.
• Allows multiple cell phones and cellular data cards to be used at the same time.
• Extends cell phone battery life.

Antenna and Accessory Options
• Omni-Mount #433 Window Antenna • Dual-Polarity Dome Antenna (301123) • Dual-Band Panel Antenna (301135) • 18" Omni Directional Antenna • Magnet Mount Antenna (301103) • Trucker Mirror Mount Antenna (301101) • Coax Cable (9913 or LMR400)

Specifications

Part Number		801245
Frequency		824-894 MHz / 1850-1990 MHz
Gain		50 dB / 50 dB
Max Output Power		+30 dBm
Max RF		+ 30 dBm / + 10 dBm
Noise Figure		3 dB / 4 dB nominal
Isolation		> 90 dB
Power Requirements		120 V AC / 3 A max
Connectors		FME-Male 50 ohms
Dimensions		5.6 x 3.6 x 1.7 (inches) 14.2 x 9.1 x 4.4 (cm)
Weight		1.5 lbs / 0.7 kg

Return to previous page